OSP108EX

Key features

• Double glass technology
• Optimal configuration, suitable for all types of demanding applications
• Individual selected and electronically matched solar cells
• Suitable for Zone 1 and Zone 2 areas with gas explosion hazard
• Excellent mechanical properties and reliability

Standards/Certification

• Complies with IEC 61215 of June 2005
• Cenelec EN 60079-0, EN 60079-7 and EN 60079-18
• KEMA 06ATEX0287 X; Ex ll 2G Ex e mb ll T4

Performance characteristics

• Typical maximum power point (mpp): 108W +/-5% (minimum power 102.6W)
• Output voltage at 108W (Vmpp): 20.1Vdc
• Current at 108W (Impp):
  5.4A +/-10%
• Short circuit current: 5.8A
• Open circuit voltage: 23.9Vdc

Electrical characteristics

• Universal GRP junction box with 4mm² terminals
• Junction box including two M25x1.5 Ex e cables glands with gland plugs
• Bypass diodes included
• System voltages of 24 volt and higher can be obtained by connecting modules in series
• Typical data at Standard Test Conditions (STC): 1,000 W/m² irradiance level, AM 1.5 spectrum and 25°C cell temperature
• Designed for use in positively grounded solar systems. For systems with negatively ground load, consumers power supply to load is via an isolated DC/DC converter provided as a part of the Orga solar power supply system

Physical characteristics

• Dimensions (L x W x H):
  1271 x 554 x 70mm
• Degree of protection: IP66
• Weight: 20kg
• Operating temperature range:
  -40°C to +40°C
• Solar cells are encapsulated between high transmission tempered glass
• Anodised aluminium frame for easy mounting

Optional accessories

• Optional non-metallic cover to protect the Solar panel during installation, commissioning and drilling against dirt and falling objects
  • MUD resistant
  • Impact resistant
  • UV stable
  • Lightweight: 3 kg
  • Stackable