OSP200EX-108
Ex certified solar panel
The OSP200EX-108 is Orga’s Zone 1 and 2 Ex certified solar panel designed to be used in the Orga solar power systems.
Key features
- Double glass technology
- Suitable for Zone 1 and Zone 2 areas with gas explosion hazard
- Excellent mechanical properties and reliability
Standards/Certification
- EN 60079-0, EN 60079-7 and EN 60079-18
- KIWA 20ATEX0001 X; ATEX II 2 G Ex eb mb IIC T5 Gb
- IEC 60079-0, IEC 60079-7 and IEC 60079-18
- IECEx KIWA 20.0001X; Ex eb mb IIC T5 Gb
Performance characteristics
- Maximum power point (mpp) (+/- 5%): 108
- Output voltage at mpp: 20,9 Vdc
- Current at mpp: 5,2 A
- Short circuit current: 5,5 A
- Open circuit voltage: 24,8 Vdc
Electrical characteristics
- Connection details: M4; two M25x1.5 Ex e cables glands with gland plugs
- Bypass diodes included
- System voltages of 24 volt and higher can be obtained by connecting modules in series
- Designed for use in positively grounded solar systems. For systems with negatively ground load, consumers power supply to load is via an isolated DC/DC converter provided as a part of the Orga solar power supply system
Physical characteristics
- Dimensions (L x W x H): 1271 x 554 x 74 mm
- Design degree of protection: IP66
- Weight: 25 kg
- Operating temperature range: -25˚C to +50˚C
- Solar cells are encapsulated between high transmission tempered glass
- Anodised aluminium frame for easy mounting
Optional accessories
- Optional non-metallic cover to protect the Solar panel during installation, commissioning and drilling against dirt and falling objects
- MUD resistant
- Impact resistant
- UV stable
- Lightweight: 3 kg
- Stackable
* Typical data at Standard Test Conditions (STC): 1000 W/m² irradiance level, AM 1.5 spectrum and 25°C cell temperature
