L550-xxx White & dual + IR
Medium intensity LED obstacle light
Obstacle light for day and night time marking of structures that present a hazard to aviation. White flashing in day and White flashing or Red flashing / steady + IR in night mode. Incorporates the benefits of advanced LED, optical and system control technologies to meet the most demanding applications.
Key features
- Five year warranty
- Housing based on 30 years of experience offshore product design experience
- Lightweight and easy to install
- Extremely low wind factor
- Integrated design with built-in photocell and monitoring – no additional power supply enclosures required
- No maintenance required over service life
- Orga optical design produces highly accurate and uniform narrow light beam
- Integrated GPS based flash synchronisation between lights. UTC 0.0.0
- Extremely low power consumption
- Constant power draw – eliminates high peak power demands especially important when running from UPS
- 15 year field proven power supply technology
- Long life power supply to match LED life, does not use electrolytic capacitors
- Made in The Netherlands
Standards/Certification
- Certified to ICAO Annex 14 Volume 1, Ninth Edition, July 2022, Chapter 6, Medium Intensity Type A / Type B / Type C obstacle light
- Various national approvals available upon request
Performance characteristics
- Horizontal beam pattern: 360°
- Flashing: see table
- Effective intensity: see table
- Vertical beam pattern: 3° minimum
- Infra-Red wavelength ~850 nm
- Infra-Red beam follows visible light, or beam is according to local standards
Electrical characteristics
- Operating voltage: 120-240 Vac nominal 50-60 Hz
- Power factor: >0.9 in day intensity mode
- Power consumption: See table
- Overvoltage protection: Class III according to IEC61643-1
Physical characteristics
- Dimensions: L x W x H:
see drawing - Weight: 12 kg
- Design degree of protection: IP65
- Operating temperature range:
-40 ºC/+55 ºC - Shipping information:
550 x 550 x400 mm; approx. 16 kg - Supplied with pre-mounted Orga cable for easy installation and high reliability ready for use
- Cable bending radius static: 7x cable diameter
- Outer cable diameter: Ø12.5 +/- 0.5 mm
- Cable weight: 260 g/m
- Level indicators for correct mounting
System design, control and monitoring
- Use as a stand-alone light, or in a multiple light system with an Orga CIP controller
- Optional Orga CIP controller facilities provides control interfaces for:
- “smart switch” aircraft detection input
- Visibility condition variable intensity input
- Remote photocell control input/override
- Visibility condition variable intensity input; intensity steps 30% and 10%