L240-XXX-(D4)-G
Low Intensity LED obstacle light
Red obstruction light for night time marking of structures that present a hazard to aviation. Red steady/ infrared steady burning in night mode. Incorporates the benefits of advanced LED, optical and system control technologies to meet the most demanding applications.
KEY FEATURES
- Five year warranty
- Housing based on 30 years of
- offshore product design experience
- Lightweight and easy to install
- Extremely low wind factor
- Integrated design with built-in photocell and monitoring –
- no additional power supply enclosures required
- Integrated GPS based flash synchronisation between lights. UTC 0.0.0
- No maintenance required over service life
- Orga optical design produces highly accurate and uniform narrow light beam
- Extremely low power consumption
- Long life power supply to match LED life, does not use electrolytic capacitors
- flashing visible red light output and or only additional IR flashing light output
- Made in The Netherlands
Standards/Certification
- Certified to ICAO Annex 14 Volume 1, Ninth Edition, July 2022, Chapter 6, Low Intensity type A, B
Performance characteristics
- Horizontal beam pattern: 360°
- Intensity Red light: See table
- Intensity IR light: See table
- Infrared wavelength ~850nm
- Infrared beam is according to Finnish TraFi
Electrical characteristics
- Operating voltage: 120-240Vac
nominal 50-60Hz - Operating voltage: 40-64Vdc
- Power consumption (Red + IR): See table
- Power consumption Infrared: ±0.5W
- Overvoltage protection: Class III according to IEC61643-1
Physical characteristics
- Dimensions: (L x W x H):
See drawing - Weight (without cable): <3 kg
- Shipping information:
- (L x W x H) 360 x 360 x 360 mm <4 kg
- Design degree of protection: IP66
- Operating temperature range:
-40ºC/+55 ºC - Supplied with pre-mounted Orga cable for easy installation and high reliability
- Cable bending radius: static 10x cable diameter
- Outer cable diameter Ø12.5 +/- 0.5 mm
- Cable weight: 261 g/m
System design, control and monitoring
- Use as a stand-alone light, or in a multiple light system with an Orga CIP controller
- Optional Orga CIP controller facilities provides control interfaces for:
- “smart switch” aircraft detection input
- Visibility condition variable intensity input; intensity steps 30% and 10%
- Remote photocell control input/override