L500-xxx-(G)
High intensity LED obstruction light
High intensity Obstruction light for day, twilight and night time marking of structures that present a hazard to aviation. White flashing in day and white flashing or red flashing / steady /Infra-Red in night mode. Incorporates the benefits of advanced LED, optical and system control technologies to meet the most demanding applications.
Key features
- Five year warranty
- Housing based on 30 years of experience offshore product design experience
- Lightweight and easy to install
- Extremely low wind factor
- Integrated design with built-in photocell and monitoring – no additional power supply enclosures required
- Built in GPS for synchronisation
- No maintenance required over service life
- Orga optical design produces highly accurate and uniform narrow light beam
- Optional Integrated automatic flash synchronisation between lights
- Extremely low power consumption
- Constant power draw – eliminates high peak power demands especially important when running from UPS
- 15 year field proven power supply technology
- Long life power supply to match LED life, does not use electrolytic capacitors
- Made in the Netherlands
Performance characteristics
- Horizontal beam pattern: 360° (2S subtype = >120°)
- Lightperformance: see table
- Effective intensity: see table
- Vertical beam pattern: 3° minimum
- Infrared (if applicable) wavelength ~850nm
- Infrared (if applicable) beam follows visible light, or beam is according to local standards
Standards/Certification
- In compliance with CE
- Certified to ICAO Annex 14 Volume 1, Ninth Edition, July 2022, Chapter 6, High Intensity Type A, B obstacle light
- In compliance with TraFi wind turbines day markings and obstacle lights 12.11.2013
- In compliance with Swedish requirements TSFS 2020_88
Electrical characteristics
- Operating voltage: 120-240Vac nominal 50-60Hz
- Power factor: >0.9 in day intensity mode
- Power consumption: see table
- Power consumption infrared: ±4W
- Power consumption heater: standard 96w
- Overvoltage protection: Class III according to IEC61643-1
Physical characteristics
- Dimensions: L x W x H: see drawing
- Weight: 23kg (2S subtype = 33kg)
- Design degree of protection: IP65
- Operating temperature range: -40ºC/+45 ºC
- Shipping information 666 x 666 x 530 mm; approx. 24.9 kg
- Shipping information 666 x 666 x 635 mm; approx. 34.9 kg (2S subtype only)
- Supplied with pre-mounted Orga cable for easy installation and high reliability ready for use
- Cable bending radius static: 10x cable diameter
- Outer cable diameter: Ø12.5 +/- 0.5 mm
- Cable weight: 260 g/m
- Level indicators for correct mounting
System design, control and monitoring
- Use as a stand-alone light, or in a multiple light system with an Orga CIP controller
- Optional Orga CIP controller facilities provide control interfaces for:
- “smart switch” aircraft detection input
- Remote photocell control input/override
- Visibility condition variable intensity input; intensity steps 100%, 30% and 10%